Aldo A. Ferri, Selected Publications

  1. Ferri, A.A., and Dowell, E.H., "The Behavior of a Linear, Damped Modal System with a Nonlinear Spring-Mass-Dry Friction Damper System Attached," J. Sound and Vibration, Vol. 101(1), pp. 55-74, 1985.
  2. Pierre, C., Ferri, A.A., and Dowell, E.H., "Multi-Harmonic Analysis of Dry Friction Damped Systems using an Incremental Harmonic Balance Method," J. Applied Mechanics, Vol. 52, No. 4, December 1985, pp. 958-964.
  3. Ferri, A.A., "On the Equivalence of the Incremental Harmonic Balance Method and the Harmonic Balance-Newton Raphson Method," J. Applied Mechanics, Vol. 53, No. 2, June 1986, pp. 455-457.
  4. Ferri, A.A., and Dowell, E.H., "Frequency Domain Solutions to Multi-Degree-of-Freedom, Dry Friction Damped Systems," J. Sound and Vibration, Vol. 124(2), 1988, pp. 207-224.
  5. Ferri, A.A., "Modeling and Analysis of Nonlinear Sleeve Joints of Large Space Structures," AIAA J. Spacecraft and Rockets, Vol. 25, No. 5, Sept.-Oct. 1988, pp. 354-360.
  6. Anderson, J.R., and Ferri, A.A., "Behavior of a Single-Degree-of-Freedom System with a Generalized Friction Law," J. Sound and Vibration, Vol. 140(2), 1990, pp. 287-304.
  7. Ferri, A.A., and Heck, B.S., "Analytical Investigation of Damping Enhancement Using Active and Passive Structural Joints," AIAA J. Guidance, Control, and Dynamics, Vol. 15, No. 5, September-October, 1992, pp. 1258-1264.
  8. Ferri, A.A., and Bindemann, A.C., "Vibration of Flexible Beams with Various Types of Frictional Support Conditions," ASME J. Vibration and Acoustics, Vol. 114, No. 3, July 1992, pp. 289-296.
  9. Ferri, A.A., Ginsberg, J.H., and Rogers, P.H., "Scattering of Plane Waves From Submerged Objects With Partially Coated Surfaces," J. Acoustical Society of America, Vol. 92, No. 3, September, 1992, pp. 1721-1728.
  10. Heck, B.S., and Ferri, A.A., "Model Reduction of Coulomb Friction Damped Systems Using Singular Perturbation Theory," ASME J. Dynamic Systems, Measurement, and Control, Vol. 118, No. 1, March 1996, pp. 84-91.
  11. Bindemann, A.C., and Ferri, A.A., "Large Amplitude Vibration of a Beam Restrained by a Non-Linear Sleeve Joint," J. Sound and Vibration, Vol 184, No.1, 1995, pp. 19-34.
  12. Ferri, A.A., "Friction Damping and Isolation Systems," J. Vibration and Acoustics, Vol. 117(B), June 1995, pp. 196-206.
  13. Whiteman, W.E., and Ferri, A.A., "Displacement-Dependent Dry Friction Damping of a Beam-Like Structure," J. Sound and Vibration, Vol. 198, no. 3, 1996, pp. 313-329
  14. Brown, A.M., and Ferri, A.A., "Probabilistic Component Mode Synthesis of Non-Deterministic Substructures," AIAA Journal, Vol. 34, No. 4, April 1996, pp. 830-834.
  15. Ferri, A.A., and Heck, B.S., "Vibration Analysis of Dry Friction Damped Turbine Blades Using Singular Perturbation Theory," ASME J. Vibration and Acoustics, Vol. 120, No. 2, 1998, pp. 588-595.
  16. Whiteman, W.E., and Ferri, A.A., "Multi-Mode Analysis of Beam-Like Structures Subjected to Displacement-Dependent Dry Friction Damping," J. Sound and Vibration, Vol. 201, No. 3, 1997, pp. 403-418.
  17. Brown, A.M., and Ferri, A.A., “Application of the Probabilistic Dynamic Synthesis Method to Realistic Structures,” AIAA Journal, Vol. 37, No. 10, October 1999, pp. 1292-1297.
  18. Whiteman, W.E., and Ferri, A.A., "Multi-Mode Analysis of Beam-Like Structures Subjected to Displacement-Dependent Dry Friction Damping," J. Sound and Vibration, Vol. 201, No. 3, 1997, pp. 403-418.
  19. Whiteman,W.W., and Ferri, A.A., “Suppression of Bending-Torsion Flutter Through Disp-lacement-Dependent Dry Friction Damping,” AIAA Journal, Vol. 37, No. 1, 1999, pp. 79-83.
  20. Ferri, A.A., "Damping Through Use of Passive and Semi-Active Dry Friction Forces," in Dynamics with Friction: Modeling, Analysis, and Experiment, Part II, Vol. 7, Series on Stability, Vibration, and Control of Structures, World Scientific Publishing, 2001, pp. 253-308.
  21. Ginsberg, J.H., Allen, M., Ferri, A.A., and Moloney, C., “A General Linear Least Squares SDOF Algorithm for Identifying Eigenvalues and Residues,” Proceedings of the Twenty-First International Modal Analysis Conference, Kissimmee, FL, February 3-6, 2003.
  22. Ferri, A.A., and Whiteman, W.E., “Stability Analysis of A Vibrational System Subject To Negative Viscous Damping And Displacement-Dependent Dry Friction Damping,” Proceedings of the ASME 2003 Design Engineering Technical Conferences, Chicago, Illinois USA, September 2-6, 2003.
  23. Heck, B.S., Clements, N.S., and Ferri, A.A., 2004, “A LEGO Experiment for Embedded Control System Design,” IEEE Control Systems Magazine, Vol. 24, No. 5, pp. 61-64.
  24. Haroon, M., Adams, D.E., Luk, Y.W., and Ferri, A.A., “A Time and Frequency Domain Approach for Identifying Nonlinear Mechanical System Models in the Absence of an Input Measurement,” J. Sound and Vibration, Vol. 283, 2005, pp. 1137-1155.
  25. Do, N., Ferri, A.A., and Bauchau, O.A., “Efficient Simulation of a Dynamic System with LuGre Friction,” 2005 ASME International Design Engineering Technical Conferences & Computers and Information In Engineering Conference, Long Beach, California, September 24-28, 2005.
  26. Michaux, M.A., Ferri, A.A., and Cunefare, K.A., “Effect Of Tangential Dither Signal On Friction Induced Oscillations In a SDOF Model,” 2005 ASME International Design Engineering Technical Conferences & Computers and Information In Engineering Conference, Long Beach, California, September 24-28, 2005. (Also, ASME. Journal of Computational and Nonlinear Dynamics, Vol 2, No 3, July 2007, p 201-210)
  27. Do, N., and Ferri, A.A., “Energy Transfer and Dissipation in a Three-Degree-of-Freedom System with Stribeck Friction,” Proceedings of the 2005 ASME IMECE Conference, Orlando, FL, Nov. 5-11.
  28. Michaux, M.A., Ferri, A.A., and Cunefare, K.A., “Effect of Waveform on the Effectiveness of Tangential Dither Forces to Cancel Friction-Induced Oscillations,” Proceedings of the 2005 ASME IMECE Conference, Orlando, FL, Nov. 5-11. (Also, accepted for the Journal of Sound and Vibration)
  29. Ferri, A.A., and Whiteman, W.E., “Free Response of a System with Negative Viscous Damping and Displacement-Dependent Dry Friction Damping.” Journal of Sound and Vibration, Vol. 306(3-5), 9 October 2007, pp 400-418.
  30. Badertscher, J., Cunefare, K.A., and Ferri, A.A., “Braking Impact of Normal Dither Signals,” ASME Journal of Vibration and Acoustics.
  31. Heck, B.S., Perrin, N., and Ferri, A.A., “Adaptive Length IIR Filters Implemented with Imprecise Computing,” Proceedings of the 2007 American Control Conference, New York, NY, July 11-13, 2007.
  32. Abbas, M., Ferri, A.A., Orchard, M.E., and Vachtsevonos, G.J., "An Intelligent Diagnostic/Prognostic Framework for Automotive Electrical Systems," Proceedings, 2007 IEEE Intelligent Vehicles Symposium (IV'07), Istanbul, Turkey, June 13-15
  33. Patrick, R., Orchard, M.E., Zhang, B., Ferri, A.A., Vachtsevanos, G.J., Kacprzynski, G., and Koelemay, M. "An Integrated Approach to Helicopter Planetary Gear Fault Diagnosis and Failure Prognosis," Accepted for IEEE AUTOTESTCON 2007, Baltimore’s Inner Harbor, Baltimore Maryland, Sept 17-20, 2007
  34. Patrick, R., Ferri, A.A., Vachtsevanos, G.J., "Detection of Carrier-Plate Cracks using Sidebands of Vibration Spectra," Accepted for 2007 ASME International Design Engineering Technical Conferences & Computers and Information In Engineering Conference, Las Vegas, NV, September 4-7, 2007.
  35. Michaux, M.A., Ferri, A.A., and Cunefare, K.A., “Modification of Friction-Induced Instability in a Disk System Through Dither Excitation Forces," Accepted for 2007 ASME International Design Engineering Technical Conferences & Computers and Information In Engineering Conference, Las Vegas, NV, September 4-7, 2007