Georgia Tech College of Engineering MRPL Research MRPL Research

The Carter N. Paden, Jr. Distinguished Chair in Metals Processing at Georgia Tech

All Journal Publications

Jump to a specific year:
2007  |  2006  |  2005  |  2004  |  2003  |  2002  |  2001  |  2000  |  1999  |  1998  |  1997  |  1996  |  1995  |  1994  |  1993  |  1992  |  1991  |  1990  |  1989  |  1988  |  1987  |  1986  |  1985  |  1982  | 

2007

  1. Spearot, D.J., Jacob, K.I., and McDowell, D.L., "Dislocation Nucleation from Bicrystal Interfaces with Dissociated Structure," International Journal of Plasticity, Vol. 23, No. 1, 2007, pp. 143-160.
  2. Spearot, D.E., Tschopp, M.A., Jacob, K.I., and McDowell, D.L., "Tensile Strength of <100> and <110> Tilt Bicrystal Copper Interfaces," Acta Materialia, Vol. 55, No. 2, 2007, pp. 705-714.
  3. Xue Y., McDowell D.L., Horstemeyer M.F., Dale M.H., and Jordon B., "Microstructure-based multistage fatigue modeling of aluminum alloy 7075-T651," Eng Fract Mechanics, in press.
  4. Xue Y, Horstemeyer MF, McDowell DL, El Kadiri H, Fan J, "Microstructure-based multistage fatigue modeling of a cast AE44 magnesium alloy," Int. J. Fatigue, Vol. 29, No. 4, 2007, pp. 666-676.
  5. Mayeur, J. and McDowell, D.L., "A Three-Dimensional Crystal Plasticity Model for Duplex Ti-6Al-4V," International Journal of Plasticity, Vol. 23, No. 9, 2007, pp. 1457-1485, doi:10.1016/j.ijplas.2006.11.006.
  6. Tschopp, M.A. and McDowell, D.L., "Structures and Energies of Asymmetric Tilt Grain Boundaries," Philosophical Magazine, 2007, doi: 10.1080/14786430701255895.
  7. Tschopp, M.A. and McDowell, D.L., "Tension-Compression Asymmetry in Homogeneous Dislocation Nucleation in Single Crystal Copper," Applied Physics Letters, Vol. 90, 121916, 2007.
  8. Zhang, M., Zhang, J. and McDowell, D.L., "Microstructure-Based Crystal Plasticity Modeling of Cyclic Deformation of Ti-6Al-4V," International Journal of Plasticity, in press.
  9. Tschopp, M.A. and McDowell, D.L., "Dislocation Nucleation in Asymmetric Tilt Grain Boundaries," International Journal of Plasticity, 2007, doi:10.1016/j.ijplas.2007.02.010.
  10. Tschopp, M.A. and McDowell, D.L., "Structure and Free Volume of <110> Symmetric Tilt Grain Boundaries with the E Structural Unit," Acta Materialia, doi:10.1016/j.actamat.2007.03.012.
  11. Tschopp, M.A. and McDowell, D.L., "Structural Unit and Faceting Description of _3 Asymmetric Tilt Grain Boundaries," Journal of Materials Science, 2007, doi: 10.1007/s10853-007-1626-6.
  12. Jordan, J.L., Ferranti, L., Austin, R.A., Dick, R.D., Foley, J.R., Thadhani, N.N., McDowell, D.L., and Benson, D.J., "Equation of State of Aluminum - Iron Oxide - Epoxy Composite," Journal of Applied Physics, Vol.101, No.9, DOI: 10.1063/1.2719272.
  13. Gordon, A,P., Trexler, M.D., Neu, R.W., Sanders, T.H.B., Jr., and McDowell, D.L., "Corrosion Kinetics of a Directionally Solidified Ni-Base Superalloy," Acta Materialia, Vol. 55, No. 10, 2007, pp. 3375-3385
  14. Capolungo, L., Spearot, D.E., Cherkaoui, M., McDowell, D.L., Qu, J., and Jacob, K., "Dislocation Nucleation from Bicrystal Interfaces and Grain Boundary Ledges: Relationship to Nanocrystalline Deformation," Journal of the Mechanics and Physics of Solids, 2007, accepted.
  15. Mayeur, J.R., McDowell, D.L., and Neu, R.W., "Crystal Plasticity Simulations of Fretting of Ti-6Al-4V in Partial Slip Regime Considering Effects of Texture," Computational Materials Science, accepted.
  16. Tschopp, M.A.and McDowell, D.L., "Asymmetric tilt grain boundary structure and energy in copper and aluminum," Philosophical Magazine, accepted.
  17. Seepersad, C.C., Allen, J.K., McDowell, D.L., and Mistree, F., "Multifunctional Topology Design of Cellular Material Structures," ASME Journal of Mechanical Design, accepted.
  18. Tschopp, M.A., Tucker, G.J., and McDowell, D.L., "Structure and free volume of 1 1 0 symmetric tilt grain boundaries with the E structural unit", Acta Materialia, Vol. 55, No. 11, 2007, pp. 3959-3969.
  19. McDowell, D.L., Choi, H.-J., Panchal, J., Austin, R., Allen, J.K. and Mistree, F., "Plasticity-Related Microstructure-Property Relations for Materials Design," Key Engineering Materials Vols. 340-341, 2007, pp. 21-30.

Back to Top

2006

  1. Kumar, R.S., Wang, A.-J., and McDowell, D.L., "Effects of Microstructure Variability on Intrinsic Fatigue Resistance of Nickel-Base Superalloys - A Computational Micromechanics Approach," International Journal of Fracture, Vol. 137, No. 1-4, 2006, pp. 173 - 210.
  2. Clayton, J.D., McDowell, D.L., and Bammann, D.J., "Modeling Dislocations and Disclinations with Finite Micropolar Elastoplasticity," International Journal of Plasticity, Vol. 22, No. 2, 2006, pp. 210-256.
  3. Goh, C.-H., McDowell, D.L., and Neu, R.W., "Plasticity in Polycrystalline Fretting Contacts," Journal of the Mechanics and Physics of Solids, Vol. 54, No. 2, 2006, pp. 340-367.
  4. Spearot, D., Jacob, K.I., and McDowell, D.L., "Nucleation of Dislocations from [001] Bicrystal Interfaces in Aluminum," Acta Materialia, Vol. 53, No. 13, 2005, pp. 3579-3589.
  5. Wilde, T.P., McDowell, D.L. and Jacob, K.I., "A Modified Mullins Model for Compressive Behavior of Goose Down Fiber Assemblies," Mechanics of Advanced Materials and Structures, Vol. 13, 2006, pp. 83-93.
  6. McGinty, R.D. and McDowell, D.L., "A Semi-Implicit Integration Scheme for Rate Independent Finite Crystal Plasticity, International Journal of Plasticity, Vol. 22, No. 6, 2006, pp. 965-1170.
  7. Shepherd, J.E., McDowell, D.L., and Jacob, K.I., "Modeling Morphology Evolution and Mechanical Behavior During Thermomechanical Processing of Semi-Crystalline Polymers," Journal of the Mechanics and Physics of Solids, Vol. 54, No. 3, 2006, pp. 467-489.
  8. Seepersad, C.C., Allen, J.K., McDowell, D.L., and Mistree, F., "Robust Design of Cellular Materials with Topological and Dimensional Imperfections," ASME Journal of Mechanical Design, Vol. 128, No. 6, 2006, pp. 1285-1297.
  9. Austin, R.A., McDowell, D.L., and Benson, D.J., "Numerical simulation of shock wave propagation in spatially-resolved reactive particle systems," Modeling and Simulation in Materials Science and Engineering, 14, 2006, pp. 537-561.
  10. Shenoy, M.M., McDowell, D.L., and Neu, R.W., "Transversely Isotropic Viscoplasticity Model for a Directionally Solidified Ni-Base Superalloy", International Journal of Plasticity, Vol. 22, No. 12, 2006, pp. 2301-2326.
  11. McDowell, D.L., "Simulation-Based Strategies for Microstructure-Sensitive Fatigue Modeling," Materials Science and Engineering A, in press, doi:10.1016/j.msea.2006.08.129 .
  12. Wang, A.-J., Kumar, R.S., Shenoy, M.M., and McDowell, D.L., "Microstructure-Based Multiscale Constitutive Modeling of -Nickel-Base Superalloys,' submitted to International Journal of Multiscale Computational Engineering, April 2006, revised July 2006, in press.
  13. Goh, C.-H., McDowell, D.L., and Neu, R.W., "Influence of Microstructure in Partial-Slip Fretting Contacts Based upon Two-Dimensional Crystal Plasticity Simulations," Journal of Tribology, Vol. 128, October 2006, pp. 735-744.

Back to Top

2005

  1. Kumar, R.S. and McDowell, D.L., "Erratum: Rapid preliminary design of rectangular linear cellular alloys for maximum heat transfer (AIAA Journal) (2004) 42:8 (1652-1661))," AIAA Journal, Vol. 43, No. 1, 2005, p. 219.
  2. Wang, A.-J. and McDowell, D.L., "Yield Surfaces of Various Periodic Metal Honeycombs at Intermediate Relative Density," International Journal of Plasticity, Vol. 21, No. 2, 2005, pp. 285-320.
  3. Shenoy, M.M., Kumar, R.S. and McDowell, D.L., "Modeling Effects of Nonmetallic Inclusions on LCF in DS Nickel-Base Superalloys," International Journal of Fatigue, Vol. 27, 2005, pp. 113-127.
  4. Dempsey, B.M., Eisele, S., and McDowell, D.L., "Heat Sink Applications of Extruded Metal Honeycombs," International Journal of Heat and Mass Transfer Vol. 48, Issues 3-4 , 2005, pp. 527-535.
  5. Seepersad, C.C., Kumar, R.S., Allen, J.K., Mistree, F. and McDowell, D.L., "Multifunctional Design of Prismatic Cellular Materials," Journal of Computer-Aided Materials Design, Vol. 11, Nos. 2-3, 2005, pp. 163-181.
  6. Spearot, D.E., Jacob, K.I., McDowell, D.L., and Plimpton, S.J., "Effect of Deformation Path Sequence on the Behavior of Nanoscale Copper Bicrystal Interfaces," Journal of Engineering Materials and Technology, Transactions of the ASME, Vol. 127, No. 4, 2005, pp. 374-382.
  7. McDowell, D.L., "Internal State Variable Theory," Handbook of Materials Modeling, Part A: Methods, eds. Sidney Yip and M.F. Horstemeyer, Springer, the Netherlands, 2005, pp. 1151-1170.
  8. McDowell, D.L., "Microstructure-Sensitive Computational Fatigue Analysis," Handbook of Materials Modeling, Part A: Methods, eds. Sidney Yip and M.F. Horstemeyer, Springer, the Netherlands, 2005, pp. 1193-1214.
  9. Shenoy, M.S., Gordon, A.P., Neu, R.W., and McDowell, D.L., "Thermomechanical Fatigue Behavior of a Directionally Solidified Ni-Base Superalloy," ASME Journal of Engineering Materials and Technology, Vol. 27, 2005, pp. 325-336.
  10. Gall, K., Biallas, G., Maier, H.J., Horstemeyer, M.F., and McDowell, D.L., "Environmentally Influenced Microstructurally Small Fatigue Crack Growth in Cast Magnesium," Materials Science and Engineering A, Vol. 396, Nos. 1-2, 2005, pp. 143-154.
  11. Clayton, J.D., Bammann, D.J. and McDowell, D.L., "A Geometric Framework for the Kinematics of Crystals with Defects," Philosophical Magazine, Vol. 85, Nos. 33-35, 2005, pp. 3983-4010.
  12. Wang, A.-J., Kumar, R.S., and McDowell, D.L., "Mechanical Behavior of Extruded Prismatic Cellular Metals," Mechanics of Advanced Materials and Structures, Vol. 12, No. 3, 2005, pp. 185-200.
  13. Choi, H.-J., Austin, R., Shepherd, J., Allen, J.K., McDowell, D.L., Mistree, F. and Benson, D.J., "An Approach for Robust Design of Reactive Powder Metal Mixtures Based on Non-deterministic Micro-scale Shock Simulation," Journal of Computer-Aided Materials Design, Vol. 12, No. 1, 2005, pp. 57-85.

Back to Top

2004

  1. Gordon, A.P. and McDowell, D.L., "Mixed Mode Loading of an Interface Crack Between Graded Creeping Solids," ASME Journal of Pressure Vessel Technology, 126(4), 2004, pp. 478-484.
  2. Kumar, R.S. and McDowell, D.L., "Generalized Continuum Modeling of 2-D Periodic Cellular Solids," International Journal of Solids and Structures, Vol. 41, No. 26, 2004, pp. 7399-7422.
  3. Hayes, A.M., Wang, A., Dempsey, B.M. and McDowell, D.L., "Mechanics of Linear Cellular Alloys," Mechanics of Materials, Vol. 36, No. 8 , 2004, pp. 691-713.
  4. Clayton, J.D., Bammann, D.J. and McDowell, D.L, "Anholonomic Configuration Spaces and Metric Tensors in Finite Elastoplasticity," International Journal of Nonlinear Mechanics, Vol. 39, 2004, pp. 1039-1049.
  5. Clayton, J.D. and McDowell, D.L., "Homogenized Finite Elastoplasticity and Damage: Theory and Computations," Mechanics of Materials, Vol. 36, 2004, pp. 799-824.
  6. Clayton, J.D., Bammann, D.J. and McDowell, D.L, "A Multiscale Gradient Theory for Single Crystalline Elastoviscoplasticity," International Journal of Engineering Science, Vol. 42, 2004, pp. 427-457.
  7. Spearot, D.E., Jacob, K.I. and McDowell, D.L., "Nonlocal Separation Constitutive Laws for Interfaces and their Relation to Nano-scale Simulations," Mechanics of Materials, Vol. 36, No. 9, 2004, pp. 825-847.
  8. Seepersad, C.-C., Dempsey, B.M., Allen, J.K., Mistree, F. and McDowell, D.L., "Design of Multifunctional Honeycomb Materials," AIAA Journal, Vol. 42, No. 5, 2004, pp. 1025-1033.
  9. Wang, A.-J. and McDowell, D.L., "In-Plane Stiffness and Yield Strength of Periodic Metal Honeycombs at Intermediate Relative Density," ASME Journal of Engineering Materials and Technology, Vol. 126, 2004, pp. 137-156.
  10. McGinty, R.D. and McDowell, D.L., "Application of Multiscale Crystal Plasticity Models to Forming Limit Diagrams," ASME Journal of Engineering Materials and Technology, Vol. 126, No. 3, 2004, pp. 285-291.
  11. Gall, K., Biallas, G., Maier, H.J., Gullett, P., Horstemeyer, M.F., and McDowell, D.L., "In-Situ Observations of Low-Cycle Fatigue Damage in Cast AM60B Magnesium in an Environmental Scanning Electron Microscope," Metallurgical and Materials Transactions A, Vol. 35A, 2004, pp. 321-331.
  12. Horstemeyer, M.F., Yang, N., Gall, K., McDowell, D.L., Fan, J. and Gullett, P., "High Cycle Fatigue of a Die Cast AZ91E-T4 Magnesium Alloy," Acta Materialia, Vol. 52, 2004, pp. 1327-1336.
  13. Gordon, A.P. and McDowell, D.L., "Numerical Simulation of Time-Dependent Fracture of Graded Bimaterial Metallic Interfaces" International Journal of Fracture, Vol. 126, 2004, pp. 321-344.
  14. Swalla, D.R., Neu, R.W. and McDowell, D.L., "Microstructural Characterization of Ti-6Al-4V Subjected to Fretting," ASME Journal of Tribology, Vol. 126, 2004, pp. 809-816.
  15. Kumar, R. S. and D. L. McDowell, "Rapid Preliminary Design of Rectangular Linear Cellular Alloys for Maximum Heat Transfer," AIAA Journal, Vol. 42, No. 8, 2004, pp. 1652-1661.

Back to Top

2003

  1. Goh, C.-H., Neu, R.W. and McDowell, D.L., "Crystallographic Plasticity in Fretting of Ti-6Al-4V," International Journal of Plasticity, Vol. 19, No. 10 , 2003, pp. 1627-1650.
  2. Bennett, V.P. and McDowell, D.L., "Crack Tip Displacements of Microstructurally Small Surface Cracks in Single Phase Ductile Polycrystals," Engineering Fracture Mechanics, Vol. 70, 2003, pp. 185-207.
  3. Bennett, V.P. and McDowell, D.L., "Polycrystal Orientation Distribution Effects on Microslip in High Cycle Fatigue," International Journal of Fatigue, Vol. 25, 2003, pp. 27-39.
  4. Clayton, J.D. and McDowell, D.L., "A Multiscale Multiplicative Decomposition for Elastoplasticity of Polycrystals," International Journal of Plasticity, Vol. 19, No. 9, 2003, pp. 1401-1444.
  5. Schroeter, B.M. and McDowell, D.L., "Measurement of Deformation Fields in Polycrystalline OFHC Copper," International Journal of Plasticity, Vol. 19, No. 9, 2003, pp. 1355-1376.
  6. Graham, S., McDowell, D.L., Lara-Curzio, E., Dinwiddie, R.B., Wang, H. and Porter, W., "Non-Destructive Characterization of Thermal Shock and Oxidation-Induced Damage by Flash Diffusivity," Journal of Composite Materials, Vol. 37, No. 1, 2003, pp. 73-87.
  7. Fan, J., McDowell, D.L., Horstemeyer, M.F., and Gall, K., "Cyclic Plasticity at Pores and Inclusions in Cast Al-Si Alloys," Engineering Fracture Mechanics, Vol. 70, No. 10, 2003, pp. 1281-1302.
  8. McDowell, D.L., Gall, K., Horstemeyer, M.F. and Fan, J., "Microstructure-Based Fatigue Modeling of Cast A356-T6 Alloy," Engineering Fracture Mechanics, Vol. 70, 2003, pp. 49-80.
  9. Morrissey, R., Goh, C.-H., and McDowell, D.L., "Microstructure-Scale Modeling of HCF Deformation," Mechanics of Materials, Vol. 35, Nos. 3-6, 2003, pp. 295-311.
  10. Wang, A.-J. and McDowell, D.L., Effects of Defects on In-Plane Properties of Periodic Metal Honeycombs, International Journal of Mechanical Sciences, Vol. 45, 2003, pp. 1799-1813.
  11. Graham, S. and McDowell, D.L., "Numerical Analysis of the Transverse Thermal Conductivity of Composites with Imperfect Interfaces," Journal of Heat Transfer, Vol. 125, No. 3, 2003, pp. 389-393.
  12. Wang, A.-J. and McDowell, D.L., "Optimization of a Metal Honeycomb Sandwich Beam-bar Subjected to Torsion and Bending," International Journal of Solids and Structures, Vol. 40, No. 9, 2003, pp 2085 - 2099.
  13. Gall, K., Biallas, G., Maier, H.J., Gullett, P., Horstemeyer, M.F., McDowell, D.L., and Fan, J., "In-Situ Observations of High-Cycle Fatigue Mechanisms in Cast AM60B Magnesium in Vacuum and Water Vapor Environments," International Journal of Fatigue, Vol. 26, No. 1, 2003, pp. 59-70.
  14. Clayton, J.D. and McDowell, D.L., "Finite Polycrystalline Elastoplasticity and Damage: Multiscale Kinematics," International Journal of Solids and Structures, Vol 40, No. 21, 2003, pp. 5669-5688.
  15. Goh, C.-H., McDowell, D.L., and Neu, R.W., "Characteristics of Plastic Deformation Field in Polycrystalline Fretting Contacts," International Journal of Fatigue, Vol. 25, Issues 9-11 , 2003, pp. 1047-1058.

Back to Top

2002

  1. Fu, C., McDowell, D.L. and Ume, I.C., "Thermoplastic Finite Element Analysis of Unfilled Plated-Through Holes During Wave Soldering," ASME Journal of Electronic Packaging, Vol. 124, No. 1, 2002, pp. 45-53.
  2. Lim, T.J. and McDowell, D.L., "Cyclic Thermomechanical Behavior of a Polycrystalline Pseudoelastic Shape Memory Alloy," Journal of the Mechanics and Physics of Solids, Vol. 50, Issue 3, 2002, pp. 651-676.
  3. Butler, G.C., Stock, S.R., McGinty, R.D. and McDowell, D.L., "X-Ray Microbeam Laue Pattern Studies of the Spreading of Orientation in OFHC Copper at Large Strains," ASME Journal of Engineering Materials and Technology, Special Issue on Micromechanics, Vol. 124, 2002, pp. 48-54.
  4. Clayton, J., Schroeter, B., Graham, S. and McDowell, D.L., "Distributions of Stretch and Rotation in Polycrystalline OFHC Cu," ASME Journal of Engineering Materials and Technology, Vol. 124, No. 3, 2002, pp. 302-313.
  5. Goh, C.-H., Neu, R.W. and McDowell, D.L., "Influence of Nonhomogeneous Material in Fretting Fatigue," ASTM STP 1425, Fretting Fatigue: Advances in Basic Understanding and Applications, 2002, 183-205.
  6. Lim, T.J., Smith, B. and McDowell, D.L., "Behavior of a Random Hollow Sphere Metal Foam, Acta Materialia, Vol. 50, No. 11, 2002, pp. 2867-2879.
  7. Bennett, V.P. and McDowell, D.L., "Crystal Plasticity Analyses of Stationary, Microstructurally Small Surface Cracks in Ductile Single Phase Polycrystals," Fatigue and Fracture of Engineering Materials and Structures, Vol. 25, No. 7, 2002, pp. 677-693.
  8. Zhou, M. and McDowell, D.L., "Equivalent Continuum for Dynamically Deforming Atomistic Particle Systems," Phil. Mag. A, Vol. 82, No. 13, 2002, pp. 2547-2574.
  9. Horstemeyer, M.F., Yang, N., Gall, K., McDowell, D.L., Fan, J. and Gullett, P., "High Cycle Fatigue Mechanisms in Cast AM60B Magnesium," International Journal of Fatigue and Fracture of Engineering Materials and Structures, Vol. 25, 2002, pp. 1045-1056.
  10. Aleong, D., Dumont, C., McDowell, D.L., Patoor, E., and Chirani, S.A., "Transformation Surfaces of Textured Pseudoelastic Cu-Zn-Al Shape Memory Alloy," Journal of Intelligent Material Systems and Structures, Vol. 13, No. 12, 2002, pp. 783-793.

Back to Top

2001

  1. Gall, K., Horstemeyer, M.F, Degner, B.W., McDowell, D.L., and Fan, J. "On the Driving Force for Fatigue Crack Formation From Inclusions and Voids in a Cast A356 Aluminum Alloy," International Journal of Fracture, Vol. 108, 2001, pp. 207-233.
  2. Fan, J., McDowell, D.L., Horstemeyer, M.F. and Gall, K., "Computational Micromechanics Analysis of Cyclic Crack-tip Behavior for Microstructurally Small Cracks in Dual-Phase Al-Si Alloys", Engineering Fracture Mechanics, Vol. 68, 2001, pp. 1687-1706.
  3. Morrissey, R.J., McDowell, D.L. and Nicholas, T., "Microplasticity in HCF of Ti-6Al-4V," International Journal of Fatigue, Vol. 23, 2001, pp. 55-64.
  4. Goh, C.-H., Wallace, J.M., Neu, R.W. and McDowell, D.L., "Polycrystal Plasticity Simulations of Fretting Fatigue," International Journal of Fatigue, Vol. 23, 2001, pp. S423-S435.
  5. McDowell, D.L., "Materials Design: A Useful Research Focus for Inelastic Behavior of Structural Metals," Special Issue of the Theoretical and Applied Fracture Mechanics, Prospects of Mesomechanics in the 21st Century: Current Thinking on Multiscale Mechanics Problems, eds. G.C. Sih and V.E. Panin, Vol. 37, 2001, pp. 245-259 (invited).

Back to Top

2000

  1. McDowell, D.L., "Modeling and Experiments in Plasticity," special volume on Research Directions in Solid Mechanics, Ed. G.J. Dvorak, Int. Journal of Solids and Structures, Vol. 37, 2000, pp. 293-309 (invited).
  2. Gall, K., Yang, N., Horstemeyer, M., McDowell, D.L., and Fan, "The Influence of Modified Intermetallics and Si Particles on Fatigue Crack Paths in a Cast A356 Al Alloy," Fatigue and Fracture of Engineering Materials and Structures, Vol. 23, No. 2, 2000, pp. 159-172.
  3. Gall, K., Lim, T.J., McDowell, D.L., Sehitoglu, H. and Chumlyakov, Y.I., "The Role of Intergranular Constraint on the Stress-Induced Martensitic Transformation in Textured Polycrystalline NiTi," International Journal of Plasticity, Special Issue on Phase Transformation, Vol. 16, 2000, pp. 1189-1214.
  4. Gall, K., Horstemeyer, M., McDowell, D.L., and Fan, J. "Finite Element Analysis of the Stress Distributions Near Damaged Si Particle Clusters in Cast Al-Si Alloys," Mechanics of Materials, Vol. 32, No. 5, 2000, pp. 277-301.
  5. Garber, M.A., McDowell, D.L. and Hutton, W.C., "Bone Loss During Simulated Weightlessness: A Biomechanical and Mineralization Study in the Rat Model," Aviation, Space and Environmental Medicine, Vol. 71, No. 6, 2000.
  6. McDowell, D.L., Clayton, J.D. and Bennett, V.P., "Integrated Diagnostic/Prognostic Tools for Small Cracks in Structures," Proc. Instn. Mech. Engrs., Vol. 214, Part C, 2000, pp. 1123-1140.
  7. Graham, S., McDowell, D. L., Lara-Curzio, E., Dinwiddie, R. B., and Wang, H., "The Effects of Microstructural Damage on the Thermal Diffusivity of Continuous Fiber-Reinforced Ceramic Matrix Composites," Environmental, Mechanical, and Thermal Properties and Performance of Continuous Fiber Ceramic Composite (CFCC) Materials and Components, ASTM STP 1392, M. G. Jenkins, Ed., American Society for Testing and Materials, West Conshohocken, PA, Sept. 2000, pp. 185-200.

Back to Top

1999

  1. Tanner, A.B. and McDowell, D.L., "Deformation, Temperature and Strain Rate Sequence Experiments on OFHC Copper," International Journal of Plasticity, Vol. 15, 1999, pp. 375-399.
  2. Tanner, A.B., McGinty, R.D. and McDowell, D.L., "Modeling Temperature and Strain Rate Sequence Effects on OFHC Copper," International Journal of Plasticity, Vol. 15, 1999, pp. 575-603.
  3. Lim, T.-J. and McDowell, D.L., "Mechanical Behavior of an Ni-Ti Shape Memory Alloy under Axial-Torsional Proportional and Nonproportional Loading," ASME Journal of Engineering Materials and Technology, Vol. 121, 1999, pp. 9-18.
  4. Bennett, V. and McDowell, D.L., "Polycrystal Orientation Effects on Microslip and Mixed Mode Behavior of Microstructurally Small Cracks," Mixed-Mode Crack Behavior, ASTM STP 1359, Eds. K.J. Miller and D.L. McDowell, 1999, pp. 203-228.
  5. Graham, S. McDowell, D.L. and Dinwiddie, R., "In-Plane Thermal Diffusivity Measurements of Orthotropic Materials," Thermal Conductivity 24, P.S. Gaal, ed.,Technomic Publishing Co., Lancaster, PA, 1999, pp. 241-252.
  6. Graham, S. and McDowell, D.L., "Multi-Dimensional Flash Diffusivity Measurements of Orthotropic Materials," International Journal of Thermophysics, Vol. 20, No. 2, 1999, pp. 691-707.
  7. Horstemeyer, M.F., McDowell, D.L., and McGinty, R.D., "Design of Experiments for Constitutive Model Selection: Application to Polycrystal Elastoviscoplasticity," in Modelling Simul. Mater. Eng., Vol. 7, 1999, pp.253-273.
  8. Saxena, A., Hall, D.E. and McDowell, D.L., "Assessment of Deflection Rate Partitioning for Analyzing Creep Crack Growth Data," Engineering Fracture Mechanics, Vol. 62, 1999, pp. 111-122.
  9. McGinty, R.D. and McDowell, D.L., "Multiscale Polycrystal Plasticity," ASME Journal of Engineering Materials and Technology, Vol. 121, 1999, pp. 203-209.
  10. Lacy, T.E., McDowell, D.L. and Talreja, R., "Gradient Concepts for Evolution of Damage," Mechanics of Materials, Vol. 31, 1999, pp. 831-860.
  11. McDowell, D.L., "Damage Mechanics in Metal Fatigue: A Discriminating Perspective," International Journal of Damage Mechanics, special issue guest edited by D.L. McDowell, Vol. 8, 1999, pp. 377-403.
  12. Gall, K., Yang, N., Horstemeyer, M., McDowell, D.L., and Fan, "The Debonding and Fracture of Si Particles During the Fatigue of a Cast Al-Si Alloy," Metallurgical and Materials Transactions A, Vol. 30A, 1999, pp. 3079-3088.
  13. Morrissey, R.J., McDowell, D.L. and Nicholas, T., "Frequency and Stress Ratio Effects in High Cycle Fatigue of Ti-6Al-4V," International Journal of Fatigue, Vol. 21, 1999, pp. 679-685.
  14. Morrissey, R.J., McDowell, D.L. and Nicholas, T., "Strain Accumulation in Ti-6Al-4V During Fatigue at High Mean Stress," Mechanics of Time-Dependent Materials, Vol. 2, 1999, pp. 195-210.

Back to Top

1998

  1. Marin, E.B. and McDowell, D.L., "Models for Compressible Elasto-Plasticity Based on Internal State Variables," International Journal of Damage Mechanics, Vol. 7, No. 1, 1998, pp. 47-83.
  2. Fu, C., McDowell, D.L., and Ume, C., "A Finite Element Procedure of a Cyclic Thermoviscoplasticity Model for Solder and Copper Interconnects," ASME Journal of Electronic Packaging, Vol. 120, 1998, pp. 24-34.
  3. Adefris, N., McDowell, D.L. and Saxena, A., "An Alternative Analytical Approximation of the Ct Parameter," Fatigue and Fracture of Engineering Materials and Structures, Vol. 21, No. 4, 1998, pp. 375-385.
  4. Horstemeyer, M.F. and McDowell, D.L., "Modeling Effects of Dislocation Substructure in Polycrystal Elastoviscoplasticity," Mechanics of Materials, Vol. 27, 1998, pp. 145-163.
  5. Hall, D.E., McDowell, D.L. and Saxena, A., "Crack Tip Parameters for Creep-Brittle Crack Growth," Fatigue and Fracture of Engineering Materials and Structures, Vol. 21, No. 4, 1998, pp. 387-401.
  6. Fu, C., Ume, I.C. and McDowell, D.L., "Thermal Stress and Fatigue Analysis of Plated-Through Holes Using an Internal State Variable Constitutive Model," Finite Elements in Analysis and Design, Elsevier, Vol. 30, 1998, pp. 1-17.
  7. Butler, G.C., Graham, S., McDowell, D.L., Stock, S.R. and Ferney, V.C., "Application of the Taylor Polycrystal Plasticity Model to Complex Deformation Experiments," ASME Journal of Engineering Materials and Technology, Vol. 120, 1998, pp. 197-205.
  8. Butler, G.C. and McDowell, D.L., "Polycrystal Constraint and Grain Subdivision," International Journal of Plasticity, Vol. 14, No. 8, 1998, pp. 703-717.
  9. Guvenilir, A., Butler, G.C., Haase, J.D., McDowell, D.L. and Stock, S.R., "X-ray Microbeam Quantification of Grain Subdivision Accompanying Large Deformations of Copper," Acta Materialia, Vol. 46, No. 18, 1998, pp. 6599-6604.

Back to Top

1997

  1. McDowell, D.L., "An Engineering Model for Propagation of Small Cracks in Fatigue," Engineering Fracture Mechanics, Vol. 56, No. 3, 1997, pp. 357-377.
  2. Miller, M.P. and McDowell, D.L., "Biaxial Deformation Experiments Over Multiple Strain Regimes," in Multiaxial Fatigue and Deformation Testing Techniques, ASTM STP 1280, Kalluri and Bonacuse, Eds., ASTM, 1997, pp. 65-91.
  3. Hamilton, B.C., Hall, D.E., Saxena, A. and McDowell, D.L., "Creep Crack Growth Behavior of Aluminum Alloy 2519: Part I - Experimental Analyis, in Elevated Temperature Effects on Fatigue and Fracture, ASTM STP 1297, eds. Piascik, Gangloff and Saxena, 1997, pp. 3-18.
  4. Hall, D.E., Hamilton, B.C., McDowell, D.L. and Saxena, A., "Creep Crack Growth Behavior of Aluminum Alloy 2519: Part II - Numerical Analysis," in Elevated Temperature Effects on Fatigue and Fracture, ASTM STP 1297, eds. Piascik, Gangloff and Saxena, 1997, pp. 19-36.
  5. Marin, E.B. and McDowell, D.L., "A Semi-Implicit Integration Scheme for Rate-Dependent and Rate-Independent Plasticity," Computers and Structures, Vol 63, No. 3, 1997, pp. 579-600.
  6. Lacy, T., McDowell, D.L., Willice, P.A. and Talreja, R., "On Representation of Damage Evolution in Continuum Damage Mechanics," International Journal of Damage Mechanics, Vol. 6, 1997, pp. 62-95.
  7. Lacy, T., McDowell, D.L. and Talreja, R., "Effects of Damage Distribution on Evolution," Applications of Continuum Damage Mechanics to Fatigue and Fracture, ASTM STP 1315, D.L. McDowell, Ed., 1997, pp. 131-149.
  8. McDowell, D.L., "Multiaxial Small Fatigue Crack Growth in Metals," International Journal of Fatigue, Vol. 19, No. 1, 1997, pp. S127-S135.
  9. McDowell, D.L., "An Approximate Algorithm for Elastic-Plastic 2-D Rolling/Sliding Contact," Wear, Vol. 211, 1997, pp. 237-246.

Back to Top

1996

  1. Miller, M.P. and McDowell, D.L., "The Effect of Stress-State on the Large Strain Inelastic Deformation Behavior of 304L Stainless Steel," ASME Journal of Engineering Materials and Technology, Vol. 188, No. 1, 1996, pp. 28-36.
  2. Adefris, N., Saxena, A. and McDowell, D.L., "Creep-Fatigue Crack Growth Behavior in 1 Cr-1Mo-0.25V Steel. Part I - Estimation of Crack Tip Parameters," Fatigue and Fracture of Engineering Materials and Structures, Vol. 19, No. 4, 1996, pp. 387-399.
  3. Adefris, N., Saxena, A. and McDowell, D.L., "Creep-Fatigue Crack Growth Behavior in 1 Cr-1Mo-0.25V Steel. Part II - Crack Growth Behavior and Models," Fatigue and Fracture of Engineering Materials and Structures, Vol. 19, No. 4, 1996, pp. 401-411.
  4. McDowell, D.L. and Bennett, V.P., "A Microcrack Growth Law for Multiaxial Fatigue," Fatigue and Fracture of Engineering Materials and Structures, Vol. 19, No. 7, 1996, pp. 821-837.
  5. Marin, E.B. and McDowell, D.L., "Associative Versus Non-Associative Porous Viscoplasticity Based on Internal State Variable Concepts," International Journal of Plasticity, Vol. 12, No. 5, 1996, pp. 629-669.
  6. Miller, M.P. and McDowell, D.L., "Modelling Large Strain Multiaxial Effects in FCC Polycrystals," International Journal of Plasticity, Vol. 12, No. 7, 1996, pp. 875-902.
  7. McDowell, D.L., "Multiaxial Fatigue Strength," ASM Handbook, Vol. 19 on Fatigue and Fracture, ASM International, 1996, pp. 263-273.
  8. McDowell, D.L., "Basic Issues in the Mechanics of High Cycle Metal Fatigue," International Journal of Fracture, Vol. 80, 1996, pp. 103-145.

Back to Top

1995

  1. McDowell, D.L., "Stress State Dependence of the Cyclic Ratchetting Behavior of Two Rail Steels," International Journal of Plasticity, Vol. 11, No. 4, 1995, pp. 397-421.
  2. Howell, M., Hahn, G.T., Rubin, C.A. and McDowell, D.L., "Finite Element Analysis of Rolling Contact for Nonlinear Kinematic Hardening Bearing Steel," ASME Journal of Tribology, Vol. 117, 1995, pp. 729-736.
  3. Lim, T.J. and McDowell, D.L., "Path Dependence of Shape Memory Alloys During Cyclic Loading," Journal of Intelligent Materials Systems and Structures, Vol. 6, 1995, pp. 817-830.

Back to Top

1994

  1. McDowell, D.L., "Description of Nonproportional Cyclic Ratchetting Behavior," European Journal of Mechanics, A/Solids, Vol. 13, No. 5, 1994, pp. 593-604.
  2. 39. McDowell, D.L., Miller, M.P. and Brooks, D.C., "A Unified Creep-Plasticity Theory for Pb-Sn Solder," Fatigue of Electronic Materials, ASTM STP 1153, S.A. Schroeder and M.R. Mitchell, Eds., ASTM, Philadelphia, 1994, pp. 42-59.

Back to Top

1993

  1. McDowell, D.L., Marin, E. and Bertoncelli, C., "A Combined Kinematic-Isotropic Hardening Theory for Porous Inelasticity of Ductile Metals," International Journal of Damage Mechanics, Vol. 2, April 1993, pp. 137-161.
  2. Yoon, K.B., Saxena, A. and McDowell, D.L., "Effect of Cyclic Overload on the Crack Growth Behavior during Hold Period at Elevated Temperature," International Journal of Fracture, Vol. 59, 1993, pp. 199-211.
  3. Berard, J.Y., McDowell, D.L, and Antolovich, S.D., "Damage Observation of a Low Carbon Steel Under Tension-Torsion Low Cycle Fatigue," ASTM STP 1191, 1993, pp. 326-344.
  4. Miller, M.P., McDowell, D.L, Oehmke, R.L.T., and Antolovich, S.D., "A Life Prediction Model for Thermomechanical Fatigue Based on Microcrack Propagation," ASTM STP 1186, 1993, pp. 35-49.

Back to Top

1992

  1. McDowell, D.L., "Bounding Surface Thermoplasticity," ASME Journal of Engineering Materials and Technology, Vol. 114, No. 3, 1992, pp. 297-303.
  2. Miller, M.P., McDowell, D.L., and Oehmke, R.L.T., "A Creep-Fatigue-Oxidation Microcrack Propagation Model for Thermomechanical Fatigue," ASME Journal of Engineering Materials and Technology, Vol. 114, No. 3, 1992, pp. 282-288.
  3. McDowell, D.L. and Moosbrugger, J.C., "Continuum Slip Foundations of Elasto-Viscoplasticity," Acta Mechanica, Vol. 93, 1992, pp. 73-87.
  4. McDowell, D.L., "A Nonlinear Kinematic Hardening Theory for Cyclic Thermoplasticity and Thermoviscoplasticity," International Journal of Plasticity, Vol. 8, 1992, pp. 695-728.
  5. McDowell, D.L. and Berard, J., "A _J-Based Approach to Biaxial Fatigue," Fatigue and Fracture of Engineering Materials and Structures, Vol. 15, No. 8, 1992, pp. 719-741.
  6. McDowell, D.L., Antolovich, S.D. and Oehmke, R.L.T., "Mechanistic Considerations for TMF Life Prediction of Nickel-Base Superalloys," Nuclear Engineering and Design, Vol. 133, 1992, pp. 383-399.
  7. Yoon, K.B., Saxena, A. and McDowell, D.L., "Influence of Crack Tip Cyclic Plasticity on Creep-Fatigue Crack Growth," ASTM STP 1131, 1992, pp. 367-392.

Back to Top

1991

  1. Berard, J.Y. and McDowell, D.L., "A _J-Based Approach to Biaxial Low Cycle Fatigue of Shear Damaged Materials," ESIS10 (K. Kussmaul, D. McDiarmid and D. Socie, Eds.), Mechanical Engineering Publications, London, 1991, pp. 413-431.
  2. McDowell, D.L. and Moyar, G.J., "Parametric Study of Cyclic Plastic Deformation in Rolling and Sliding Line Contact with Realistic Nonlinear Material Behavior," WEAR, Vol. 144, 1991, pp. 19-37.

Back to Top

1990

  1. Leung, Chun-Pok and McDowell, D.L., "Inclusion of Primary Creep in the Estimation of the Ct Parameter," International Journal of Fracture, Vol. 46, 1990, pp. 81-104.
  2. Moosbrugger, J.C. and McDowell, D.L., "A Rate-Dependent Bounding Surface Model with a Generalized Image Point for Cyclic Nonproportional Viscoplasticity," Journal of the Mechanics and Physics of Solids, Vol. 38, No. 5, 1990, pp. 627-656.
  3. Leung, Chun-Pok, McDowell, D.L. and Saxena, A., "Estimation of the Ct Parameter: Experimental Implications," ASTM Journal of Testing and Evaluation, Vol. 18, No. 1, 1990, pp. 25-37.

Back to Top

1989

  1. McDowell, D.L., Ho, Kwang-Il, and Staley, J., "An Anisotropic, Damage-Coupled Viscoplastic Model for Creep-Dominated Cyclic Loading," ASTM STP 995, Vol. I, A. Saxena, J.D. Landes and J.L. Bassani, Eds., 1989, pp. 173-194.
  2. Leung, Chun-Pok, McDowell, D.L., and Saxena, A., "A Numerical Study of Nonsteady State Creep at Stationary Crack Tips," ASTM STP 995, Vol. I, A. Saxena, J.D. Landes and J.L. Bassani, Eds., 1989, pp. 55-67.
  3. Yoder, P.Y., and McDowell, D.L., "Bounding-Surface Plasticity: Stress Space versus Strain Space," Acta Mechanica, Vol. 77, 1989, pp. 13-45.
  4. McDowell, D.L., "Evaluation of Intersection Conditions for Two Surface Plasticity Theory," International Journal of Plasticity, Vol. 5, No. 1, 1989, pp. 29-50.
  5. Moosbrugger, J.C. and McDowell, D.L., "On a Class of Kinematic Hardening Rules for Nonproportional Cyclic Plasticity," ASME Journal of Engineering Materials and Technology, Vol. 111, 1989, pp. 87-98.

Back to Top

1988

  1. McDowell, D.L., Stock, S.R., Stahl, D., and Antolovich, S.D., "Biaxial Path Dependence of Deformation Substructure of Type 304 Stainless Steel," Metallurgical Transactions, Vol. 19A, May 1988, pp. 1277-1293.
  2. Leung, Chun-Pok, McDowell, D.L., and Saxena, A., "Consideration of Primary Creep at a Stationary Crack Tip: Implications for the Ct Parameter," International Journal of Fracture, Vol. 36, 1988, pp. 275-289.

Back to Top

1987

  1. McDowell, D.L., "An Evaluation of Recent Developments in Hardening and Flow Rules for Rate-Independent, Nonproportional Cyclic Plasticity," ASME Journal of Applied Mechanics, Vol. 54, No. 2, 1987, pp. 323-334.
  2. McDowell, D.L., "A Simple, Experimentally Motivated Cyclic Plasticity Model," ASCE Journal of Engineering Mechanics, Vol. 113, No. 3, March 1987, pp.378-397.
  3. Beals, N., McDowell, D., and Spector, M., "Fatigue Behavior of Porous Polysulfone Surface Coatings for Orthopaedic Applications," International Journal of Fatigue, Vol. 9, No. 4, October 1987, pp. 211-216.

Back to Top

1986

  1. Sotolongo, W., and McDowell, D.L., "An Evaluation of Several Constitutive Model Structures for Transient Nonproportional Cyclic Plasticity," ASME Journal of Pressure Vessel Technology, Vol. 108, Aug. 1986, pp. 273-279.
  2. Sotolongo, W., and McDowell, D.L., "On the Numerical Integration of Elasto-Plastic Constitutive Model Structures for Nonproportional Cyclic Loading," Computers and Structures, Vol. 24, No. 4, 1986, pp. 595-606.
  3. DeMane, M.F, Beals, N.B., McDowell, D.L., Greenwood, K.M., and Spector, M., "Porous Polysulfone-Coated Femoral Stems," ASTM STP F4, 1986.

Back to Top

1985

  1. McDowell, D. L. and Socie, D. F., "Transient and Stable Deformation Behavior Under Cyclic Nonproportional Loading," ASTM STP 853, 1985, pp. 64-87.
  2. Hayhurst, D. R., Leckie, F. A., and McDowell, D. L., "Damage Growth Under Nonproportional Loading," ASTM STP 853, 1985, pp. 688-699.
  3. Fash, J. W., Socie, D. F., and McDowell, D. L., "Fatigue Life Estimates for a Simple Notched Component Under Biaxial Loading," ASTM STP 853, 1985, pp. 497-513.
  4. McDowell, D. L., "A Two Surface Model for Transient Nonproportional Cyclic Plasticity: Part I - Development of Appropriate Equations," ASME Journal of Applied Mechanics, Vol. 52, June 1985, pp. 298-302.
  5. McDowell, D. L., "A Two Surface Model for Transient Nonproportional Cyclic Plasticity: Part II - Comparison of Theory with Experiments," ASME Journal of Applied Mechanics, Vol. 52, June 1985, pp. 303-308.
  6. McDowell, D. L., "An Experimental Study of the Structure of Constitutive Equations for Nonproportional Cyclic Plasticity," ASME Journal of Engineering Materials and Technology, Vol. 107, Oct. 1985, pp. 307-315.

Back to Top

1982

  1. McDowell, D. L., D. F. Socie, and H. S. Lamba, "Multiaxial Nonproportional Cyclic Deformation," Low-Cycle Fatigue and Life Prediction, ASTM STP 770, C. Amzallag, B. N. Leis, and P. Rabbe, Eds., American Society for Testing and Materials, 1982, pp. 500-518.

Back to Top