In mesoscale manufacturing, desired dimensional and surface characteristics are defined, but edge conditions are not specified in design. The final edge conditions that exist in mesoscale objects are created not only by the manufacturing process but, because of their size, also by part handling procedures. In these parts, the concern is not only with burrs, which can be formed by some mesoscale manufacturing processes, but also with the shape and size of the edge. These properties are critically important as the edge can constitute a large percentage of the smallest features of mesoscale objects. Undefined edge geometry can result in measurement, assembly, and operational difficulties. Due to the potential problems caused by edge conditions, it is desirable to have the ability to measure and characterize the edge conditions of parts. An ideal measurement and characterization strategy would allow for process monitoring as well as part qualification. Also, it is necessary to provide a standard method for differentiating between acceptable and unacceptable edges.